Panzerkampfgeher Gerzer II (Pz.Kpgh. Gerzer II) Tankoped - a mech and tank combined - designed to engage enemy armored vehicles. Details include: commanders cupola, gunner's periscope, rangefinders, driver's view port, main cannon, radio antenna, Zimmerit paste texture on legs, towing rings, escape hatches, exhaust and cooling vents Double knee joints so it can hull down, gun swivels, turret rotates 360, ball joint articulation.

PRINTING INSTRUCTIONS: . Insert balls into sockets with side to side rocking action - pliers recommended. Some sanding might be required depending on your printer. 0.2mm layer height.

• Gerzer2 SKIRT_holder_right.STL -print 1x 40%infill
• Gerzer2 SKIRT_right.STL                 -print 2x 20%infill
• Gerzer2 ARMOR_back.STL            -print 4x 20%infill
• Gerzer2 GEAR_1.STL                         -print 2x 20%infill
• Gerzer2 GUN_barrel_v2.STL         -print 1x 20%infill
• Gerzer2 LEG.STL                                  -print 4x 20%infill
• Gerzer2 KNEE.STL                              -print 2x 20%infill
• Gerzer2 HULL.STL                               -print 1x 20%infill
• Gerzer2 GUN_socket.STL               -print 1x 20%infill
• Gerzer2 GUN_ball.STL                     -print 1x 20%infill
• Gerzer2 GEAR_2.STL                        -print 2x 20%infill
• Gerzer2 FOOT.STL                             -print 2x 40%infill
• Gerzer2 ARMOR_front.STL         -print 4x 20%infill
• Gerzer2 TURRET_socket.STL     -print 1x 20%infill
• Gerzer2 TURRET_ball.STL           -print 1x 40%infill
• Gerzer2 TURRET.STL                      -print 1x 20%infill
• Gerzer2 SKIRT_middle.STL          -print 2x 20%infill, supports needed
• Gerzer2 SKIRT_left.STL                  -print 2x 20%infill
• Gerzer2 SKIRT_holder_left.STL -print 1x 40%infill