This design is a slight modification of owens' support-free Menger sponge, with the base sliced off slightly to lie flat on the build platform. (Else a tiny corner sticks down in the center and prints on a tiny layer by itself, making the rest of the model too high off the build platform to be stable.)
Used for a printer test of an Afinia H-Series printer with PLA, a MakerBot Mini, an Afinia H-Series printer with ABS, and a MakerBot Replicator 2, shown in that order in the figure above.
MakerHome, Day 357: http://makerhome.blogspot.com/...
=====
Twitter: twitter.com/mathgrrl
Hacktastic blog: www.mathgrrl.com/hacktastic
Shapeways geekhaus store: www.shapeways.com/shops/mathgr...
This design and all associated pictures and files are licensed under the Creative Commons Attribution Non-Commercial Share Alike license. If you want to use designs, images, or files outside of the terms of this license, please email [email protected].
Loading prints...
26mm Level 3 Menger sponge
Creative Commons Attribution-NoDerivatives
You can download, share, and use commercially, but you cannot change the material in any way or use it to make something new.
Licensed under CC BY-ND
Files Included
1 downloadable file:
Downloaded: 29 times
Loading comments...