SummaryInspired from the awesome OpenR/C Formula 1 car by Daniel Norée; http://www.thingiverse.com/thing:1193309 Print: 2x Part A 2x Part B 4x Part CPrint SettingsPrinter: 155mm x 95mm + 3DprinterRafts: Doesn't MatterSupports: NoResolution: 0.2mmInfill: 15%Notes: You need at least 155x95mm build volume for this model. Preferably around 155x250 to get it all in one.Post-PrintingPut part A on the side down and insert the Part B in center of each three-hole-group. Part C goes on the sides. Lastly flip everything over and align the assembled parts into the last Part A and push them together. Some filing may be required!How I Designed ThisThis was designed using Autodesk Fusion 360 and using the tyres as measurements from the http://www.thingiverse.com/thing:1193309 model