So many of us out there printing the excellent Marvin the Martian model that I figured it would be fitting for him to have a vehicle to suit complete with navigation console and landing gear.
You can choose to print with or without the landing gear.
The spacecraft has been modeled to fix a standard sized Marvin print. If you print, or have printed, a scaled version of Marvin, you will have to scale the UFO respectively.
My Print Settings: (your settings may vary)
Filament Type - ABS Extruder Temp - 270C Layer Height - 0.2mm Infill - 10% Infill Type - Rectilinear Perimeters - 3 Solid Top/Bottom - 3 Extrusion Width - Perimeters and Top Solid Infill set to same as my nozzle size (0.4mm) every where else default (Not required but helps to make a nice sealed print) Print Time - 2 Hours~
If you print the landing gear separately from the UFO you may have to have a lower extruder temp and slower printing speed. ABS juice or glue can be used to secure the landing gear in place if required.
You can find the Key Chain-less 3D Hubs Marvin model here published by brainfloat that I have pictured or the excellent Marvin Advanced published by Shanny Shine here.
Loading prints...
Marvin's Spacecraft (to fit 3D Hubs Marvin)
Creative Commons Public Domain
The creator has waived all rights to the work. You can copy, modify, distribute and perform the work, even for commercial purposes, without asking permission.
Licensed under CC0
Loading comments...