Keep the Steel Man away from your tea party. What better way to insure that your party won't be interrupted by Superman? Just print a bunch of these and place them around your
living room and surely you won't have any unexpected visits from Superman.
Print the kryptonite.stl with transparent or translucent filament, green, transparent or natural (PLA) should be perfect. I used PET for my print, it was the only transparent filament I had. Grey filament for the rocky base and if you so desire, print one of the inserts (the second one is thicker) in a green color and place it on the inside of the crystal, this should allow for a bit of green to shine through if you decide to use transparent filament. Most tea lights, at least those that I have, are yellow, so the green insert helps insure that the kryptonite stays greenish.
Base and insert printed in grey and green PLA, respectively, at 205ºC with a layer size of 0.2mm and infill of 5%
Crystal printed in transparent PETG, at 240ºC, with a layer size of 0.2mm and infill of 10%
Loading prints...
Kryptonite tea light
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Loading comments...