Print it in Ninjaflex at 70mm/s with the [Flexion Extruder](https://www.flexionextruder.com "Flexible filament extruder")
SummaryThis is another flexible Iphone4 case printed with Ninjaflex Filament (http://www.fennerdrives.com/3D).
Video:
It snaps over the phone well and all of the buttons work. But...You might put a little extra material on the corners to help with fall protection. Also, I left some support material at the bottom end. After the print, just cut this away with a razor blade (to open the hole for the speakers and charge cord. InstructionsMakerbot Replicator (original version with the MK8 spring loaded extruder upgrade). Extruder temp: 215 C Platform: Room temp (25C), bare aluminum, glass, or Kapton tape all work well Retraction Settings (In Skeinforge under Dimension tab): Minimum Travel for Retraction: 1.0mm Retraction Distance: 2.0mm
Loading prints...
Flexible Iphone4 Case
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Files Included
1 downloadable file:
Downloaded: 60 times
Loading comments...