this is my own spacelamp, I printed the bulb by PETG (HDglass) and spiralize function set on my slicer. The base and the extension was printed by PLA, separated and then glued toghether. need 2 screw and bolt M4 x15mm for assembly the lamp holder and the extension. after print you need to cut the bulb bottom part.
tip: insert the electric cable before gluing the two parts
Loading prints...
spacelamp
1
like
2
collections
Tags:
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Loading comments...