SummaryFive different feet for an evenflo high chair. Raises it by 10 cm or so. Either print 4 of the simple foot or one of each of the dino feet. Fits very snuggly if oriented as pictured and it matters which foot is which for the feet to look right.Print SettingsPrinter Brand: SeeMeCNCPrinter: ORION Delta 3D PrinterRafts: NoSupports: YesResolution: 0.5mmInfill: >= 0.2How I Designed ThisI took a stegosaurus model and cut it off at the ankles. Then cleaned up the feet to all sit flat and lengthened them to be taller. Could principally done with any model with legs that sit directly above the feet.