The aesthetic of the design is similar to Rebel, skulls, and funny theme. A unique style that you don't encounter in regular stores. All the files are ready for 3D printing; I've inspected them for 

Intersection Objects, Flipped Faces, Manifolds, and Wall thickness. 

I was careful while designing to avoid using support structures and double checked all the wall thickness. The base is solid and should print easily. The designs are pretty much compatible with most bike manufacturers, if for any reason you face an issue it’s probably due to scaling. Try scaling up or down.

The designs are exclusive for Pinshape, and you will not find anything like them anywhere else. I've included the design information in the about the print settings. If the models require assembly I've added step by step instructions. 

Goat Story Holder: I designed this especial for Goat story mugs and it fit 100% with standard size of the mugs. (http://www.goat-story.com/) You just need to screw and nut to put it together.

 Print Settings: Support: yes, Raft: yes, Layer height: recommended 1.0 mm,  Infill: Minimum 20%.

OX Bike Seat: Taken from 3d scanning for  OX. You just need to screw and nut to assemble it.

Print Settings: Support: yes, Raft: yes, Layer height: recommended 1.0 mm,  Infill: Minimum 20%, OX Bike Seat mount Infill: 75%.

Mustache planter:  Print Settings: Support: yes, Raft: yes, Layer height: recommended 1.0 mm,  Infill: Minimum 20%.

Bike trouser holder: Bike pant holder is worn around your ankles to keep your pants out of the chains way. It fits in every pocket and does not have any sharp edges, so it won't damage anything. The rubber band can be wrapped around it, if it's not in use. 

Print Settings: Support: NO, Raft: yes, Layer height: recommended 1.0, mm Infill: 20% .

Bike Trouser Clips: Bike pant Clips are worn around your ankles to keep your pants out of the chains way. It fits in every pocket and does not have any sharp edges, so it won't damage anything. The rubber band can be wrapped around it, if it's not in use. 

Print Settings: Support: NO, Raft: No, Layer height: recommended 1.0, mm Infill: 20%.

Bike Pedal: Work with standard spindles. If the print model not fit to your spindles just scale it.

Print Settings: Support: NO, Raft: NO, Layer height: recommended 1.0, mm Infill: 20%.

Spokes Bike: All the shapes have a hole in the back of its head so it can clip on the spokes of a bike wheel. Get the size right and it moves around and makes noise!!  

Material: Spokes (6).OBJ (check images) Recommended Glow Filament.

Print Settings:  Support: NO, Raft: Recommended, Layer height: recommended 1.0 mm, Infill: 10%.

Valve Cap: This fit to the bike you can screw them straight on in place of existing valve caps. You can also use it for your cars just scale it. 

Print Settings: Support: NO, Raft: Recommended, Layer height: recommended 1.0 mm, Infill: 10%.