More details at http://www.rcgroups.com/forums...
This is a mod for the LT210 5mm frame. It allows to lower the quad's center of gravity, improving stability. It was designed to be extruded in ABS, 0.2mm layers and four-loops walls, but PLA will probably be fine as well.
Parts:
- Top plate
- FPV Camera holder
- Front bumper
- Rear bumper
- Battery plate
- Xiaomi/Gopro holder
What you will need, other than these 3d-printed parts, the stock LT210 frame and your custom electronics:
- three 5.5mm hexagonal M3 nuts (better if they're nylocks)
- three M3 20mm allen cap head hexagonal socket bolts
- four M3 10mm allen cap head hexagonal socket bolts
- a fpv camera with the same lens holder as the PZ0420
- a small vTx, with central antenna connector
- remove the pins from your flight controller (or buy a "naked version")
- a small Rx (also consider using a "naked version"). a frsky x4r without the pins occupies almost no space
- straight connector fpv antenna
Please, share it if you print :)
Loading prints...
LT210 5mm lowrider kit
Creative Commons Public Domain
The creator has waived all rights to the work. You can copy, modify, distribute and perform the work, even for commercial purposes, without asking permission.
Licensed under CC0
Loading comments...