This Magic the Gathering custom case I designed features a "butterfly" style opening system with as steam punk-ish theme. The parts are all easy to print and do not require support if the printer is tuned correctly. It is recommended that the prints are done in a higher resolution to acquire a better detail and less clean up. The dovetail slide of the centre key may need to be cleaned up if artifacting occurs.

The print requires one of each stl to be printed as well as six 4-40 x 0.375" cap screws. A tap may be required to apply the threads to the parts if hole quality is too poor. It is possible to thread the bolts directly into the parts.