SummaryFor use in Human size Robot Arms and Legs. Fast and strong. Printing specs : Infill : 10% Number of shells 2 Layer height : 0.30mm Build plate : 110deg Speed While extruding : 90mm/sec Speed while traveling : 150mm/sec Printing these files with support and print time : GearboxCasingMain.stl 4hours 3 minutes MainGear.stl 3 hours 24 minutes The rest of the files normal without support.and print time : Gears1.stl 46 minutes Gears2.stl 24 minutes GearboxCasingTop.stl 2 hour 2 minutes. I use this motor on 12v https://tigerimports.net/sunshop/index.php?l=product_detail&p=9635 "O" and i print only with pla and for support Abs
Loading prints...
Powerful Robot Gearbox V2
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Loading comments...