This is a fully functioning spring-loaded cabinet latch appropriate for standard kitchen cabinet size doors and smaller. I used it on a BBQ cabinet along with the Steampunk Hinge also on this site.
The springy bit is the flexing PVC 1/2 circle seen about mid-way; it is long lasting. For a finish I mixed acetone with copper powder and painted it on with a small brush. Once dry high gloss polishing with a brass dremel brush or softer tools is possible.
Printed in ABS at .3 mm resolution. Finish coated with acetone mixed with copper powder and then polished with dremel tools. Uses #6 screws to fasten or if scaled to 80% it will use #4 screws. With the copper powder I anticipate it will change colour and go green with humidity which is the desired effect. Or just paint it. Copper powder is on ebay. See the matching hinge.
Available for download at: https://cults3d.com/en/3d-mode...
Loading prints...
Steampunk Cabinet Latch
Creative Commons Public Domain
The creator has waived all rights to the work. You can copy, modify, distribute and perform the work, even for commercial purposes, without asking permission.
Licensed under CC0
Loading comments...