Summary
Push fitting filament dust filter for 3mm and smaller filament. You screw the push fitting inside the printed part with two wrenches, put a small piece of fabrik / sponge inside it and make one hole for the filament afterwards. Attach it to your PTFE tube that goes into your extruder cold end and it will collect dust from your filament. Print Settings
Printer:
My custom 3D printer Rafts:
Yes Supports:
No Resolution:
0.2 Infill:
20 Notes:
When loading the file into e.g. Cura, Mirror Z it so the big hole gets on top, then print it.
Print settings - Brim: 20 lines - Shell thickness 1mm - Fill bottom top 0.5mm - Print speed 10mm/s - Temp ex 260C - Temp bed 100C - Filament dia 2.9mm - Flow 115% - Nozzle 0.5mm
Loading prints...
Push fitting filament dust filter
0
likes
0
collections
Tags:
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Files Included
1 downloadable file:
Free download - login required
Downloaded: 29 times
Downloaded: 29 times
Loading comments...