Free
This straddle clamp is meant to mark 3 sides of a piece of lumber for various cutting. One edge is at a 90° angle and the opposing side is at a 45° for miters. The jaw depth is 3" and the throat opens up to 4" to fit standard 2x4's and 4x4's.
Print Settings:
30-50% infill, .25mm layers, supports only needed for the moving side.
Orient the moving side with the cylinders against the hotplate so the threads (3/8-16) come out properly.
Loading prints...
Straddle Clamp
47
likes
34
collections
Tags:
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Loading comments...