Unfortunately, I am unable to upload the full build here (limited to 150 files and 100mb), so if you want to download this, you will need to do so from my thingiverse post here: http://www.thingiverse.com/thi...
After spending nearly two months gathering, modifying, and printing parts, I have finally put together a satisfying set for Settlers of Catan that covers both the Original as well as the 5-6 player expansion. You can expect to find every model you will need to print for the game including the storage case, the only non-printable parts are the magnets (which can be considered optional, but highly recommended) and the dice bag for the development tiles (also optional).
The majority of the parts are designed for a dual extrusion printer or configured to have filament changes at specific layer heights. However, an alternative would of course be to ignore all of that and paint the parts yourself.
All of the prints were also designed to fit on my FlashForge Creator Pro, which has a limited build volume of X=225mm, Y=145mm, Z=150mm. This is mostly reflected by the rather large modifications I made to the storage case, which I've modeled from scratch based mostly on the original concept.
Enjoy!
Loading prints...
Settlers of Catan Dual Extrusion Complete Original & 5-6 Player
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Loading comments...