Summary This is a large scale project. It's taken me the better part of three weeks to break down the sword into printable sections. I have a 200mm square bed, so keep that in mind, this may not fit on all printers. Print 1 each of all the parts except you can print either 1 MEOWB or 1 each of MEOWB1 & B2. I made it a tongue and groove assembly to let me print it in two nights instead of one whole day. You will need 2 30mm pegs for the MEOWB to BLADE_BASE_A connection And finally, 15 of the standard pegs. (17 PEGS TOTAL) You will also need a lot of crazy glue, primer, paint, etc. I have all but the last two pieces printed. I will post a make when it is completed. I have printed all the parts with 20% infill and 0.2 LAYERS. The parts are at a 45 degree angle since I traced the original bitmap from the game. So all the STLs need to be re-oriented. Enjoy! Print Settings Printer: Da Vinci 1.0 Rafts: No Supports: No Resolution: 0.2 Layers Infill: 20%