Summary Case for 32x32mm FPV cameras. The camera I used is this one: http://bit.ly/1OJXdaC Main features: Full protection of all the parts, including lens. Tilt angle for racing. Hole for M3 screw so you can custom a more aggressive angle. Holes for zip ties. 4 screw holes. Material friendly. No support / No rafts. Any tips are quite welcome! They will help me going on with free designs. Thanks! Please, like and subscribe to my youtube channel: https://www.youtube.com/user/gransmith Print Settings Printer Brand: RepRap Printer: P3Steel Rafts: Doesn't Matter Supports: No Resolution: 0.5mm or less Infill: 5% or more Notes: You can use 1mm perimeters and about 10% to reduce the weight. If your printer can handle, reduce as much as possible the amount of material, so you save same weight. Lens face should face the heatbed when positioning for printing.