Summary An elegant pair of glasses. The frame is ready to accept 6 base curve lenses. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Supports: Yes Resolution: 0.1 Notes: For the best printing result it is advised to use PVA for support material. Otherwise, it is important to use the suggested settings below. For the temples you do not have to use brim; the two small pads help to bed adhesion. Cura Settings Layer Hight : 0.1mm ( or 0.06mm) Support : Yes Support Density : 20% Support Z Distance : 0.2mm Support Horizontal Expansion : 0.5mm Enable Support Interface : Yes Support Interface Thickness : 0.4mm Support Interface Density : 100% Brim : 1mm (for the frame, if you have adhesion problems)
Loading prints...
SPEyewear 2
Creative Commons Attribution-NoDerivatives
You can download, share, and use commercially, but you cannot change the material in any way or use it to make something new.
Licensed under CC BY-ND
Loading comments...