Single piece print that folds up to become a bouncy ball.
Instructions
additional materials:
-hot glue gun
1 - print. I printed these with my default settings: 0.1mm layer height and .8mm shell thickness, no support or raft. I used PLA for the prints shown here.
2 - carefully remove from build plate. work inward around perimeter.
3 - put a dot of hotglue on each corner, fold up and hold.
4 - continue until you have two hemispheres glued up.
5 - put glue around seam and close up. note: to get just the protrusions a different color, I switched filament at exactly 2.05mm with the use of a software plugin Result
Loading prints...
Springy Shape
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Files Included
1 downloadable file:
Downloaded: 64 times
Loading comments...