Summary Parametric SMT Tape Feeders for OpenPnp or other Pick and Place machines. You can customize the holders for any sized tape limited only by your print bed size. Before wasting your time printing a huge array I suggest a small 20mm 8x1 two tray model to ensure your extruder is properly calibrated. Also be sure your choice of filament has good bed adhesion. Print Settings Printer: TS3D Prusa inspired Rafts: No Supports: No Resolution: 0.3 Infill: 20% Notes: Ensure good bed adhesion ! Post-Printing Assembly You will probably want glue the two halves together, use a bit of superglue in the slots of the press fit or if you print in ABS perhaps acetone. I fasten the final unit to the machine bed using fine craft tape. How I Designed This OpenScad I used OpenScad thus the part is fully parametric, the fillets take a while to render you could disable them but print quality is often better with rounded corners.