Summary Featured on MyMiniFactory! NEW MODULE version on MyMiniFactory. I updated the fillets and removed two of the three name tags. Thanks for the blog post Adafruit! Thanks for the blog post lays147!
More Modular Drawer Systems
Modular Drawers 2.0 (Interlocking) Modular Drawers 1.0 (Stackable) Modular Hex Drawers (Stackable) Economical Drawers (Not modular)
Find me on:
Print Settings Printer: Maker Select V2 Rafts: Doesn't Matter Supports: No Resolution: 150-250 microns Infill: 5% Notes: Print module at 102% in order for the drawers to fit! Rafts are important for the drawers. Without the raft the drawer will have a square-ish bottom and you will need to sand it in order for it to fit in the module. Rafts are important for the module too. The tests I did without rafts produced a bad first layer. My Settings: Print module at 102% Print drawer at 100% Shell Thickness: 1.2mm Printing Temperature: 208C Bed Temperature: 60C Time: about 5 hours 40 minutes
Loading prints...
The HIVE - Stackable Hex Drawers
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...