Summary This printer is still in the experimental phase. Multi-Media Prusa may in the future be able to 3d print, create PCB boards or Frostrude. *9/19/2017 Added updated Y Carriage and Y Endstop. *9/23/2017 Added E3D_Mount, not tested yet. Wade Extruder mount will be updated soon. *10/1/2017 Added E3D with Capacitive and/or Inductive mounts. Added X-carriage endstop sensor.

10/2/2017 Moved BOM to each assembly video. Added x Carriage Generic front for E3d and Paste extruders.. Paste/Chocolate/Pancake https://www.thingiverse.com/th... This is still under development and will soon have a Z sensor added.

*10/3/2017 Removed x-Idler.stl and added two versions X_Idler_5mm.stl and X_Idler_3mm.stl. Updated X and Y belt clasp. *10/7/2017 Added Arduino RAMPS 1.4 board holder. Added ZX Carriage Video *10/9/2017 Added video(S) for wiring capacitive and inductive sensors. *10/14/2017 Removed X_Axis_Endstop.stl and added EndStopV2.stl (can be used for any axis and remember to cover pins with non-conductive tape or use non-conductive bolt in 2020). *10/16/2017 Added T8 Idler(Z_T8_Holder.stl) attachment, May remove M8 idler in the future. Possible update in future, y axis end stop idler for y axis. *10/21/2017 Removed X-Carriage attachment for E3D and added Updated E3D with side mount for either 40 mm fan or Inductive and Capacitive sensor(s). *10/23/2017 Added RAMPS 1.4 tutorials ^10/30/2017 Added RAMPS 1.4 LCD tutorial. I'll be posting a final version of the printer in a couple of days. Print Settings Rafts: Yes Supports: Yes Resolution: .2 Infill: .2 Notes: Y_Motor_Mount.stl only requires rafts.

Custom Section

Printer Base

Z Axis Assembly Part 1

Wiring capacitive sensor.

wiring inductive sensor

RAMPS 1.4 Tutorial

Adding RAMPS 1.4 Endstop switches

Video Tutorials: