Stepcraft Dust extraction! Kress motors 43mm! Using the Festool Vacuum Cleaner. And others!
Additional needed - 4pcs. magnets 2x6mm; contact adhesive; double sided tape; and an empty tin can. From a tin can, we cut a 65mm diameter ring with a hole of 44mm. And with a double-sided adhesive tape, we stick the ring from the bottom, where brushes are strengthened.
Hope there's not too much mistake. Sorry for writing with Google Translate!
Loading prints...
Stepcraft Dust extraction!
2
likes
0
collections
Tags:
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...