Here only test file of detail of the Base.
All files here: https://www.redpah.com/product/4124
Small video: https://youtu.be/j0_smlq55Dk
3 assembly modes: A. Screwed to the table B. Resting on the table C. To main monitor
ASSEMBLY MANUAL: http://www.artics.it/stv-is-it/progetti3d/manual/dual-lcd-stand-steps.pdf
Glue is NOT necessary. Use a 2-3 mm Allen wrench to fix the inclination of the support of each monitor. Print the long parts horizontally for greater solidity. Follow the assembly tables. Use high strength PLA or ABS (personally I used ABS-ULTRAT). For printer with plate minimum 200x200 mm.
4 holes on the main base allow further fixing with screws. For heavy or very high monitors, a simple steel cable can be added to counteract the forward bending.
Personally I use the B and C versions for many months without problems.
Loading prints...
Dual vertical LCD monitor stand VESA, 3 assembly modes.
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Files Included
2 downloadable files:
Downloaded: 125 times
Loading comments...