After building a very crude version of this tumbler to polish up some bronzefill dice I made I revisited the idea to make this more clean looking version. This requires a very small amount of materials to make and there will be a version coming along that will only need to filament to build this without any M3 screws and nuts.
For this version you will need: 2 X M3x30 3 X M3x18 5 X M3n
Can be easily printed in PLA or PETG and there are files for pla "bearings" and TPU lined "Pro bearings". The bearings are the same measurement as skateboard bearings so those can be used as well if you have a couple spares laying around.
The build instructions can be followed in the pics and only requires an Allen wrench for the assembly.
Filament layer swaps for added visual style to match my Kitchenaid.
The Tumbler Housing Back, Tumbler Housing Front, and Tumbler Can will need support added.
The Tumbler Can Mounting Post and Tumbler Housing Arm will need a brim added.
Either PLA or PTEG are acceptable filaments for this project. The Tumbler Bearing Pro Flex is printed in TPU.
Loading prints...
Kitchenaid Rock Tumbler
Creative Commons Attribution-NonCommercial-NoDerivatives
You can download and share as long as you credit the creator, but you cannot change the material or use it for commercial purposes.
Licensed under CC BY-NC-ND
Loading comments...