I wanted to make a light up staff for Halloween, I used translucent light blue for the "crystal" with 10% infill for greater brightness, the hole in the middle fits an Adafruit Jewel 7 snug, I used white ABS at 60% infill for the connector and "wings". The hole in the staff base are set up for 1 1/4" PVC pipe where the USB battery pack is stored. I used an Arduino MKR1000 that I had laying around to control the RGB on the Jewel with Blynk on my phone so I can change the color at whim. The txt file has the code used for the MKR1000. For the Blynk project I used 1 button set to virtual PIN 0 and a zeRGBa set to virtual PIN 1 merged. I played around for a few hours trying to set up a breathing option but could not get it to work because the wifi turned off on the MKR1000 when running a loop for color changing.
Loading prints...
Wizard Staff RGB
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Loading comments...