I completed this project after designing the parts and then slicing them so I could fit my build plate and require no support material. I have included all the files to print your own ukulele. I designed the pieces to be glued together with super glue. The neck is a dovetail joint and not superglued. It can be take apart for travel or swapping with other designs. Let me know if you have any questions or comments. Enjoy!
Electronics were purchased from Guitarfetish.com They were KPW14 Kwikplug P Bass Wiring Harness- PRE-SOLDERED Drop-In And EP_MINI_BIRDS KP - Mini Birds- Covered Mini Humbuckers- Chrome Case - Kwikplug® Ready
Tuning pegs used were Makanu Ukulele Tuning Pegs 2R2L They can be found on Amazon for about 7 dollars.
The bridge can also be found on Amazon. Kmise A2860 2 Piece Ukulele Rosewood Bridge Hardwood 82x25x8mm with Bone Saddle 12mm String Spacing
Loading prints...
Volcano Electric Ukulele
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...