Bird Cathedral
This is a Bird Feeder for little Birds. It's design is inspired by Gothic Cathedrals :-)
Only small Birds can get in due to the small openings. Now they have a save place to eat and if necessary they can escape trough one of the four sides :-)
Of course there is also a place for bigger Birds to eat. They can go to the Tower on top. This tower is also a Seed dispenser. It can be filled by taking the Tower Roof off. By turning the green ring it is possible to regulate the amount of Seeds coming out.
The Bird Cathedral is designed to stand on a floor or table, but it is also possible to hang it from a tree. Then the Birds are less worried about Cats etc. :-)
The green center floor can be taken out for cleaning purposes.
Included with the files is an “ manual “ to get an idea how the parts come together. They are also shown with the pictures one the website. But be warned. On the website they are NOT in the chronological order.
Needed parts:
M6 treated rod, length 255mm
M6 nut& super glue /lock nut
M6 nut
White PLA around 2900 gram
Green PLA around 550 gram
PET-G around 10 gram
313 hours :-)
List of files that need to be printed:
inner part1 center.stl 2X
inner part2 center.stl 2X
north:
north gate.stl
entrance north.stl
inner part L1 north.stl
inner part R1 north.stl
inner part L2 north east south west.stl
inner part R2 north east south west.stl
inner arch above gate.stl
inner arch support north L.stl
inner arch support north R.stl
window L.stl
window R.stl
window glass A.stl 2X
window glass B.stl 2X
East:
east & west L gate.stl
east & west R gate.stl
entrance east.stl
inner part L1 east & west.stl
inner part R1 east & west.stl
inner part L2 north east south west.stl
inner part R2 north east south west.stl
inner arch above gate.stl
inner arch support east & west L.stl
inner arch support east & west R.stl
window L.stl
window R.stl
window glass A.stl 2X
window glass B.stl 2X
South:
south gate.stl
entrance south.stl
inner part L1 south.stl
inner part R1 south.stl
inner part L2 north east south west.stl
inner part R2 north east south west.stl
inner arch above gate.stl
inner arch support south L.stl
inner arch support south R.stl
window L.stl
window R.stl
window glass A.stl 2X
window glass B.stl 2X
West:
east & west L gate.stl
east & west R gate.stl
entrance west.stl
inner part L1 east & west.stl
inner part R1 east & west.stl
inner part L2 north east south west.stl
inner part R2 north east south west.stl
inner arch above gate.stl
inner arch support east & west L.stl
inner arch support east & west R.stl
window L.stl
window R.stl
window glass A.stl 2X
window glass B.stl 2X
base center floor.stl /base center floor REMOVABLE.stl (print with support material)
base east & west side.stl 2X
base north side.stl
base south side.stl
window glass A.stl 8X
window glass B.stl 8X
outer pillar L1 east & west.stl 2x
outer pillar L1 north.stl
outer pillar L1 south.stl
outer pillar L2 NESW.stl 4x
outer pillar L3 NESW.stl 4x
outer pillar R1 east & west.stl 2x
outer pillar R1 north.stl
outer pillar R1 south.stl
outer pillar R2 NESW.stl 4x
outer pillar R3 NESW.stl 4x
outer pillar top east.stl
outer pillar top north.stl
outer pillar top south.stl
outer pillar top west.stl
roof corner lining.stl 4x
roof L.stl 4x
roof R.stl 4x
connector.stl 4x
tower base.stl
tower top.stl 2X
tower top connector.stl 4X
tower top roof.stl
feeder ring.stl
tower roof.stl
tower feeder container SPIRAL OUTER CONTOUR MODE.stl
tower.stl
tower window.stl 4x
roof top lining.stl 4x
foot north, east & west L.stl 3x
foot north, east & west R.stl 3x
foot south L.stl
foot south R.stl
If you have any questions feel free to ask.
Do you think I made a mistake or forgot something feel free to inform me :-)
Loading prints...
Bird Cathedral
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Files Included
63 downloadable files:
Loading comments...