http://goo.gl/6oGW9U
This is a set of tool holder blocks.
Yes, it's that easy as you think!
Why not design / print / assemble / organize these parts in our own way?
Or, redesign our own holder bricks and join the tab / slot part, just like a interlocking puzzle!
The last thing to do is screwing this set on the wall.
No more giant printing piece - with unsatisfied design!
========== about the bricks : ==========
No. 00, 01, 02 is for screwing the tool holder to the wall.
No. 03, 04, 08 screw drivers (diameter 4 / 8 / 9.5 mm).
No. 05 quick wrench.
No. 06 digital caliper.
No. 07 scissors.
No. 09 nail drawer.
No. 10 cutter.
No. 11 pliers.
No. 12 smooth file.
Unit_Yin = slot.
Unit_Yang = tab.
the width of each block is 15 mm.
=================================
It can be very easy to modify the block and add slot and tab part at two sides.
Enjoy it and have fun!
Printing Profile :
infill : 20%
shells : 2
layer height : 0.2 mm
raft : yes
support : yes
material use : around 84 g
Print time : around 7.5 hours
for someone have curling problem with big piece printing, you can check this page of No. 09 "Design with mouse ears".
http://goo.gl/xyWeCu
Update!!! add 3 more block for hold onto Replicator 2.
Update!!! add 6 joints for more rows! (@heytiger)
Loading prints...
Assemblable tool holder blocks
214
likes
70
collections
Tags:
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Loading comments...