Description
https://www.youtube.com/watch?v=iyQjpDEgMG4&t=59s
A totallly change box printed in plastic, fully functional with N-1-2-3-4-R, that can be armed familiarly step by step, only using the video and documents added bellow for all the pieces. Its allow to learn of functioning, gear relations and 3D printing.
The tools and screws that its needs, are easy to find in a shop.
ASSEMBLY GUIDE= https://youtu.be/2OFyleBvPhM
Recent Prints (1)
More from this category
Fidget spinner bow tie style
by 3deyedoc
I had a request for a bow tie shaped spinner and this was the result. I was able to print this on...
1 ❤️
1 💬
0 ⬇️
$1.0
ORGANIZ3D tm Splendor Full Box
The Splendor Full Box From the ORGANIZ3D tm Brand, created by HOCHEFAB 3D / Crazy-Games. The pic...
4 ❤️
1 💬
1 ⬇️
$7.5
Strix Screech Hero 8, 20॰ Mount
by Br8knitOFF
TPU, 80% infill, color of your choice.
2 ❤️
1 💬
0 ⬇️
Free
Dubai Call Girls Service 0525382202 Indian Call Girls in Dubai
by voyal73886
Dubai Call Girls Service 0525382202 Ind
0 ❤️
0 💬
0 ⬇️
Free
Comments (9)
Sign in to leave a comment.
Make money online from home extra cash more than $18000 to $21000. Start getting paid every month Thousands Dollars online. I have received $26000 in this month by just working online from home in my part time. every person easily do this job by.
just Open This Website.....> https://quicksrich.blogspot.com/
Nice design. However there are several things to note. 1) the 3 x shifter splines are too tight and do not engage easily enough. I fixed this by enlarging to 104%, cutting off the top and bottom and splicing onto original middle and then adjusting for diameter increase of 104 % .2) The shafts are not worth printing . I used 10mm dowel. I had to adjust the spacing in places. 3)The larger parts I had to add plates to hold the print down due to bending on my printer as the print cooled (Prusa clone)ie end, top plates, larger gears. 4)Also many of the parts are not actually ready for printing and need to be rotated 90 degrees using Slic3r. Have spent about 2 weeks on this as each item took about 40-130 minutes to print. Spacers being the exception. 5)I locked the lower shaft using holes drilled through each gear and filament threaded in. Had to use a steel pin on the drive having locked C008,9 together. 6) I haven't glued anything on the top shaft as the shifters cover all the splines, which are locked to the shaft with filament in the holes and welded on one side with a soldering iron. The 10mm dowel is actually only 9.5mm which makes everything a little loose on the shafts. However all working now with a drive motor running a gearbox from pinshape.
Having trouble printing C024. The middle is not holding together. I've tried rotating it 90 degrees so its flat and standing up. Any suggestions on how to print this piece?
Have you succeeded? You need to add supports under the middle section and printed splines down.. Using slic3r generated supports does not work too well.ie a small plate across the ends (0.7 thickness )and space supports out from the middle all locked together with a 20mm circular piece at 0.7 height.
Looks really cool. Can't wait to try this one!
Should all the gears be locked to the shafts? Or should any of the gears spin freely on one of the shafts?
Hi In this video you step q you will say the pieces are glued together = https://www.youtube.com/watch?v=2OFyleBvPhM