Free
This mount will move the motor back 11 mm into cleaner air so it runs quieter. It will accommodate a 6 inch propeller, possibly 7 inch, depending on the height of the motor.
Print in PETG for strength and heat resistance. I recommend 0.4 mm nozzle, 0.2 mm layer height, 3 perimeters, 30% infill.
Ream the holes with a 3 mm drill bit. Mount with 16 mm M3 bolts and nuts. I epoxied the nuts into the S800 wooden motor mount, taking care not to get epoxy on the threads. Then I glued the carbon fiber plate over the wooden plate, again taking care to keep glue off the threads.
Loading prints...
Reptile S800 Sky Shadow Motor Mount
3
likes
0
collections
Tags:
Creative Commons Attribution-NoDerivatives
You can download, share, and use commercially, but you cannot change the material in any way or use it to make something new.
Licensed under CC BY-ND
Files Included
1 downloadable file:
Free download - login required
Downloaded: 31 times
Downloaded: 31 times
Loading comments...