Use a 1 meter LED-strip and wrap it around the holder in the middle. A rubber band helps to put all cassettes in the right position. I glued the lid on the body. I recommend wrapping the cable around the hole in the middle to fix it to the lamp, so the stripe doesn't get lose if some pulls at the wire.
I used this LED-stripe from Amazon since it is dimmable. https://www.amazon.de/Onforu-Lichtband-Selbstklebend-Innenbeleuchtung-Weihnachten/dp/B07S92CJJ4/ref=sr_1_34?__mk_de_DE=ÅMÅŽÕÑ&keywords=led+strip&qid=1585743341&s=lighting&sr=1-34
Use 4 perimeters for the tiny rails on the outside.
Recomment using PET-G or ABS since LED can heat up a little.
The tower in the middle doesnt need much infill, i used 10.
Loading prints...
Cassette Lamp
Creative Commons Attribution-NonCommercial-NoDerivatives
You can download and share as long as you credit the creator, but you cannot change the material or use it for commercial purposes.
Licensed under CC BY-NC-ND
Loading comments...