This is a black light resin curing box. This box is 5" long x 4" wide x 4" high. The sides are vented and there is bracket support on top for a 4.5 x 3.25" Black Light. The print should be rotated 90 degrees on printed with the top on the bottom with Supports touching the build plate. I then covered the inside with foil and covered a 8 x 8" foam box liner with aluminum foil as well. This box works very well and can cure a print in 2 - 5 minutes easy.
The light I am using is a 6 LED UV light I picked up on Amazon for roughly $20. There are pictures of the light and it's back panel info with the photos of the print. This is the light the box was designed for.
Loading prints...
UV Resin Curing Box
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Files Included
1 downloadable file:
Downloaded: 27 times
Loading comments...