The mold is intended for the tire manufacture from silicone or similar flexible material in scale 1:10. It consists of 2 parts: top and bottom part. Each part can be 3D printed without supports.
Mold dimensions:
- diameter – 124 mm
- height – 44 mm
Tire dimensions:
- outer diameter – 84 mm
- overall width – 34 mm
- inner diameter – 44 mm
If you want a different wheel size, simply scale the mold.
The bottom mold part has 5 special bosses and Top mold part has 5 special holes to guide mold parts in the closed state. Also, there are 4 slots for better opening with a screwdriver or similar instrument.
In the Top mold part are 4 small holes for material injection.
Both mold parts have 4 holes with diameter 6 mm for bolting it in closed state.
Loading prints...
Mold for diecast rear tire for Dune Buggy Scale 1:10
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Loading comments...