special designed vacuum table for using “Triple D³ paper”
printed whit the flexible hybrid slicing technology
if you want to connect it to your vacuum-cleaner then you can change the file vacuumbed_koppel_stofzuiger.stl so it wil fit the diameter of your vacuum-cleaner.
so if you want to print it your self look in your slicer-program where to put the @pause command then when the printer is pausing just ad the inlay and print on. (the inlay i used is mdf 10,5 mm thick but your free to use other materials) Top is mdf whit holes in it.
inlay and top are based on a4 format 210mm x 297 mm
Why printed whit the flexible hybrid slicing?
if its a full solid print the print time is over 50 hours
now i printed it all in 9 hours
Loading prints...
vacuum table
12
likes
10
collections
Creative Commons Attribution-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given and your contributions are under the same license.
Licensed under CC BY-SA
Loading comments...