A small shelf based on pipes, use the pipes (printed ones) to be the shelf bottom, I enclosed hollow ones which print faster for a lightweight version and the full filled ones for heavier items. I used 20 percent infill and normal PLA , 200 hot end, 60 bed, 50 speed, 4 layers top and bottom. Makes for a nice knick knack shelf for kids room or living room, just use colors you prefer. Designed holes in bracket to physically put to a surface or you can use the adhesive backing. Need to use glue on pipes after print to lock in place pipes, (gorilla glue or super glue works , what I used). I used .70 inches for the pipe size, other pipes that size should work if you just print the brackets, just adjust and make more brakets to support it.
Loading prints...
Small shelf, quick print, expandable.
Creative Commons Public Domain
The creator has waived all rights to the work. You can copy, modify, distribute and perform the work, even for commercial purposes, without asking permission.
Licensed under CC0
Loading comments...