Search Results
Found 24 results tagged with "aquaponics"
Designs Tagged "aquaponics" (24)
Y-Splitter - 3Dponics Open-Source Gardening
by 3Dponics
The y-splitter allows you to split the tubing to power multiple 3Dponics systems using just one a...
Planter (Round) - 3Dponics Non-Circulating Hydroponics
by 3Dponics
The planter acts as a pot, supporting your plant and its roots so that it grows healthy and stron...
Receiver - 3Dponics Non-Circulating Hydroponics
by 3Dponics
The receiver is secured to the reservoir with the nut and holds the floater in place.Please ...
Nut - 3Dponics Non-Circulating Hydroponics
by 3Dponics
The nut screws onto the receiver, securing the floater to your reservoir.Please visit our we...
Tube Separator - 3Dponics Open-Source Gardening
by 3Dponics
The tube separator holds your tubes in place, keeping them straight and knot-free. This ensures w...
Floater Version 1 - 3Dponics Non-Circulating Hydroponics
by 3Dponics
The floater (version 1) is one of the most crucial components of the 3Dponics non-circulating sys...
Floater Version 2 - 3Dponics Non-Circulating Hydroponics
by 3Dponics
Version 2 of the 3Dponics floater works just like the first version, except it has a spot for rub...
Venturi - 3Dponics Drip Hydroponics
by 3Dponics
An improved version of the original conduit. It’s smaller and therefore takes less time and mater...
Support Rod (Square) - 3Dponics Drip Hydroponics
by 3Dponics
Feed your rubber tubing through the hollow rod to ensure that the water or nutrient solution flow...
Sprinkler Head (3/4 inch) - 3Dponics Drip Hydroponics
by 3Dponics
Distributes water evenly over plant leaves to enhance plant health and growth. Can be installed a...
Silencer - 3Dponics Drip Hydroponics
by 3Dponics
Reduces the noise produced by the system when the pump is operating so that you can have a system...
Grow Media Basket V2 - 3Dponics Drip Hydroponics
by 3Dponics
Holds the grow media and protects the plant roots from damage. Great for clay, coco or perlite gr...
Grow Media Basket V1 - 3Dponics Drip Hydroponics
by 3Dponics
Mesh structure that provides a bed for the plant starter and protects the plant roots from damage...
Drip nozzle 3/8 inch, 4 holes - 3Dponics Drip Hydroponics
by 3Dponics
Screws on to bottle like a bottle cap and ensures that the water drips at a slow but steady rate....
Drip nozzle 3/8 inch, 3 holes - 3Dponics Drip Hydroponics
by 3Dponics
Screws on to bottle like a bottle cap and ensures that the water drips at a slow but steady rate....
Drain Cap - 3Dponics Drip Hydroponics
by 3Dponics
Acts like a plug or stopper, preventing the grow media from clogging and/or falling out of the bo...
Outer Bottle Clip - 3Dponics Drip Hydroponics
by 3Dponics
Used in combination with the Inner Clip. Allows you to fasten the bottles together and adjust the...
Bottle Stand - 3Dponics Non-Circulating Hydroponics
by 3Dponics
The bottle stand is used in the 3Dponics Non-Circulating Hydroponics system to hold the nutrient ...
Drip Nozzle (3/4 inch, 4 hole) - 3Dponics Drip Hydroponics
by 3Dponics
Screws on to bottle like a bottle cap and ensures that the water drips at a controlled rate. To a...
Hydroponics Silencer
An alternative design for a drip silencer. This design focuses on being easy to print without the...
Hydroponics 2-Liter Lip Sprinkler - 3/8 ID Tubing
This is a "sprinkler" designed for the cutoff edge of a 2-Liter pop bottle (110mm wide at cutoff)...
Hydroponics Bottle Filter
Alternate design for the 3Dponics Drain Cap. The original design didn't fit well with ...
Plant Tower
by BlueTree375
Customizable vertical farming tower for your growing needs. Set the size based on your 3d p...
Cascaqua | Cascading Aquaponics System
by Avooq
As featured on. http://3dprintingindustry.com/2015/11/05/grow-you... http://www.treehugger.com/su...