Just a simple desktop storage option for small stuff like memory cards and the like. Multiple options for the main box with numerous divider styles. Photo shows one of my derivatives (the piboy dmg version).
For ease of printing, this is the more simple solid front version of the box. If it gets enough likes I will put the component version up.
To stop the lid sliding around there is a thin alignment frame to glue to the back of the front panel. I also added a height tool for making this task 100 percent accurate. Print the base you want. print the front panel. front the frame. print two height tool blocks. The blocks hold the front panel just slightly proud of the main enclosure when placed inside the box. Add a few drops of glue to the frame, place it on the blocks, then present the front panel to it and align quickly. Then lift the front back off, push the frame firmly in place for the glue to hold it, and bin the two height blocks.
Loading prints...
ExPi DMG storage thingy
Creative Commons Attribution-NonCommercial-NoDerivatives
You can download and share as long as you credit the creator, but you cannot change the material or use it for commercial purposes.
Licensed under CC BY-NC-ND
Loading comments...