Summary Someone pointed that I should cut my threaded rod below the stock acrylic parts hole but I don't want to cut it instead I took the trouble to model a bracket that doesn't hold the threaded rod. This is often for those who are having wobble issues where the threaded rod already bent (like mine here https://youtu.be/kOVKfpDfA9U) and needs to be replaced. It does fixed my problem but only for lower layers by around 3cm of print layers only before the wobble starts to occur again. At least it somehow fixed the problem temporarily Instructions There are 2 files included, if you have a bad wobble issues, print with the 1mm wobble file first because it does fit on my first print. However the smooth rood bracket for the 1mm wobble thing are not aligned with the original bracket. Use it for temporary fix to your wobble problem then print the other one. Printed with about 20% infill, 4 bottom/top and 3 layer of walls