SummaryThis version of the smoothie case is smaller than my original and also uses standard ATX plugs for the wire connections accept for the temperature thermistors. Print 6 of the lid clips, these are to hold the filter in place. Print the filter with no top and bottom layers and the infill around 35%. Parts needed Connectors: Thermistors: Mouser pn. 538-70107-0036 x 4 Mouser pn. 538-50-57-9402 x 4 pins: 538-16-02-0114 x 10-20 538-16-02-0102 x 10-20 Stepper and endstops: Mouser pn. 538-39-01-2245 x 2 Mouser pn. 538-39-01-2241 x 2 or 538-46207-0024 Main Power: Mouser pn. 538-39-01-2080 x 1 Mouser pn. 538-39-01-2081 x 1 or 538-46207-1108 You will need these pins: Mouser pn. 538-46012-3142 x 100 Mouser pn. 538-39-00-0039 x 100 Qty of 100 will give you extras in case you mess some of them up while crimping. If you get the header style you will not need 538-46012-3142. UPDATE: I made a few changes to the case body to eliminate some assembly issues when installing the Smoothie board. Added some photos of my install.Print SettingsPrinter: ORD Bot HadronRafts: Doesn't MatterSupports: Yes