Printing of the transmitter tray including attached STL is optimized to the type of a printer prusa i3MK2 with the size of pad (x,y) 250x210mm.
When properly transfered the attached stl files can be printed on a 3D printer with the minimum size of pad 220x200 mm. The weight of the assembled tray is not higher than 250 g. (Infill percentage = 15%, primary layer hight = 0,2 mm.)
The tray consists of 9 kinds of parts (1-9) that are printed on a 3D printer with the minimum size of pad 220 x 200 mm. The parts no. 10, 11 a 12 are changable according to user needs. The part no. 12 can be used in case of a transmitter with antenna on the back side of the tray, otherwise use the part no. 7.
Loading prints...
Transmitter Tray Turnigy 9XR PRO to print in 3D
Creative Commons Public Domain
The creator has waived all rights to the work. You can copy, modify, distribute and perform the work, even for commercial purposes, without asking permission.
Licensed under CC0
Loading comments...