Serotonin - Happiness, Satisfaction

Dopamine - Love, Passion

Acetylcholine - Learning, Dreaming, Memory

Update 12 January 2018: models are now solid  (no multiple shells) due to some slicing software not being able to handle multiple shells.

Print settings:

Printed on an Ultimaker 2 Extended +  |  0.4mm Nozzle |   Sliced with Cura slicing software

No Supports, No Bed/Platform Adhesion.

Build Plate Temp: 60Deg/C  |  printed in Australian Made White PLA from @Imaginables3D @210Deg/C

Print speed: 50mm/s - Top/Bottom Speed 20mm/s - Travel Speed 120mm/s - Initial Layer Speed 20mm/s

In-Fill Density : 20%    -    In-Fill Pattern : Grid   -   Layer Height: 0.1mm

Print Time: Serotonin - 23mins  |  Dopamine - 19mins  |  Acetylcholine - 16mins

Boolean Operands were employed in the creation of this model.

Please remember material shrinkage will vary depending on material, brand and colour.

If you like any of my designs please show your support by sharing them with your followers on Twitter #3dprinting and upload pictures of your prints. Happy printing.

D3V!rum3tM^ch!n^ @DVirumEtMachina

22 January 2017