Summary This is a chess set designed to be printed with supports only on from the buildplate (there's a 10mm hole for placing a weight or magnet underneath). At full size, the King is 110mm tall, which is appropriate for very large board/squares (~2.5in/60mm), but scales down easily. The picture above is printed from 50% scaled pieces. Print Settings Rafts: Doesn't Matter Supports: Yes Infill: 20% Notes: Select the support from build plate only option. Any material should be fine, and little infill is required. You may wish to glue some sort of weight or magnet into the round hole on the bottom of each piece.