Walt Perko
@wperko
Willing to license all my designs to whomever wants to 3D Print and sell them ... $1/3D Print.
http://www.brainless.org/ndmp/WaltPerkoBiography.htm
DE9 & DB25 Panel Mount Adapters
by wperko
DE9 & DB25 Panel Mount Adapters for Vintage Computers with Modern Ribbon Cable Connectors ......
WKP Altair 101714 Card Guide
by wperko
Two versions of a single card guide. 12.7mm wide and 15mm wide (a little beefier) ... ...
WKP Altair 101714 Card Guide
by wperko
Two versions of a single card guide. 12.7mm wide and 15mm wide (a little beefier) ... ...
22-Position 44-PIN Top Card Edge Connector Hoods
by wperko
It all started with a guy needing a hood for another vintage piece of equipment, then I got the C...
IMSAI Card Guides
by wperko
These IMSAI Card Guides are designed to fit the Don Caprio ReProduction IMSAI Cabinet &...
LILYGO® TTGO VGA32 V1.4 Controller PS/2 case
by wperko
The "LILYGO® TTGO VGA32 V1.4 Controller PS/2 Mouse And Keyboard Controller Graphics Library Game ...
µTerm2-S Case
by wperko
This is a nice tight fitting case for the µTerm2-S board. The Monitor Hangers are so the us...
Celestron NexStar 4 GT Telescope - Front Lens Cap
by wperko
Do you have a Celestron NexStar 4 GT Maksutov Cassegrain Telescope - 11041 ? &nbs...
RC2014 Bases
by wperko
A friend gave me a bunch of RC2014 modules and back planes so while I start learning about the sy...
Geoff Graham & Gary Kaufman VT-100 ASCII Terminal
by wperko
Did you build a Geoff Graham & Gary Kaufman VT-100 ASCII Terminal kit? Now you can...
EDAC Connector Hood
by wperko
This is the hood for a Parallel ASCII keyboard to be used on a Processor Technology Subsystem B c...
Single S-100 Connector Protector Board Stand
by wperko
During a ZOOM meeting with the S100 Google group it was noticed that one person had an edge conne...