The Blade Typing Assistant works as an extend finger for fingers that can't.
Print Time: 20mins per grip.
Standard Fast Print settings:
Print speed: 60mm/s - Top/Bottom Speed 30mm/s - Travel Speed 150mm/s - Initial Layer Speed 30mm/s
No Supports, No Bed Adhesion.
Printed on an Ultimaker 2 Extended + | 0.4mm Nozzle | Sliced with Cura slicing software
Build Plate Temp: 60Deg/C | printed in ColorFabb PLA/PLH @212Deg/C.
If you like any of my designs please show your support by sharing them with your followers on Twitter #3dprinting and upload pictures of your prints. Happy printing.
Boolean Operands were employed in the creation of this model.
Update 12 January 2018: model now solid (no multiple shells) due to some slicing software not being able to handle multiple shells.
Loading prints...
Blade Typing Assistant
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Loading comments...