Created an ID protector for myself because it was beginning to wear down in my wallet. I know others must be having the same problem, so enjoy!
**Slow printing speed is crucial for this print to be successful.**
Layer height: .2mm
Print speed: 20mm/s
Printing temperature: 195 C
Bed temperature: 60 C
Platform adhesion type: Raft w/ .22mm air gap
Retraction speed: 50 mm/s
Retraction distance: 4.5mm
Initial layer thickness: .3mm
Travel speed: 70mm/s
Bottom layer speed: 15 mm/s
Infill speed: 70 mm/s
Top/bottom speed: 30 mm/s
Infill: 100%
*All other speeds are the same as the print speed*
Loading prints...
ID Protector
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Files Included
1 downloadable file:
Downloaded: 23 times
Loading comments...