No need for supports because I have designed them into the print. Cura's generated supports kept giving me problems.
Layer height: .1mm
Print speed: 40mm/s
Printing temperature: 195 C
Bed temperature: 60 C
Platform adhesion type: Raft w/ .22mm air gap
Retraction speed: 50 mm/s
Retraction distance: 4.5mm
Initial layer thickness: .3mm
Travel speed: 70mm/s
Bottom layer speed: 15 mm/s
Infill speed: 70 mm/s
Top/bottom speed: 30 mm/s
Infill: 0%
Loading prints...
XYZ Plane
2
likes
0
collections
Tags:
Creative Commons Attribution-NonCommercial-ShareAlike
You can distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, with attribution and under the same license.
Licensed under CC BY-NC-SA
Files Included
1 downloadable file:
Free download - login required
Downloaded: 54 times
Downloaded: 54 times
Loading comments...