Apollo 7 saturn 1b October 11, 1968 - October 22, 1968
first manned flight of the Apollo ship with 3 men on board.
Model scale 1 / 60th Height: 118 cm diameter: 115 mm weight: 1,1 kg quantity per color: white about 400 gr olive about 300 gr black approximately 250 gr silver around 200 gr red and yellow about a few grams
295 pieces, removable in 22 parts
classification of parts: part number, color, part name (in English), quantity.stl
more information : https://the-amphioxus.monsite-...
3D PRINTING PARAMETERS
print preferably all the parts on the same printer in order to have a better conservation of dimensions. Some pieces may require 5 to 6 hours of printing The modeling was tested on an i3 with a 0.4mm nozzle. Imperative first layer at 0.3mm and must be even on the entire printing surface (desired autoleveling) layer height 0.2 mm for large pieces. 0.1 or 0.15 mm for small parts. No support needed. 15% filling if necessary. 0% on the thin walls. Brim imperative on the thin walls. Thickness of edges for thin pieces at 0.4mm (one nozzle passage) edge thickness for other parts at 0.8 or 1.2 mm
for UNITED STATES brands of RP1 tanks:
the printing will be done in two steps : - printing upside down white backgrounds without outline. - then, without removing the part from the bed, print upside down red letters inside without any outline.
The final rendering will be a UNITED band (or STATES) red on a white background, in one piece of 0.3 mm thick smooth read side.
To do this, in the slicing software, use the print marks of the STL ("v" markers) to position the position of the two models in the same place (the two points of the marks on the same grid mark of the slicer). In addition, the "v" markers will be placed closest to the home of the printer so that the print starts with the markers to purge the nozzle.
Loading prints...
saturn 1b apollo 7
Creative Commons Attribution
You can distribute, remix, adapt, and build upon the material in any medium or format, as long as attribution is given to the creator.
Licensed under CC BY
Loading comments...